• About us
• Leave Message
• Download
• Chinese

• HOME
• |
• PRODUCTS
• |
• COMPANY
• |
• SUPPORT
• |
• TECHNOLOGY
• |
• APPLICATIONS
• |
• CONTACT

The ATP is specially designed for worldwide analog interfaces for its high compatibility with international telephony environments. With passive and trunking interface capacities, it features programmable voltage thresholds, loop polarity reversal and multiple event triggers, and can easily be configured to accommodate to diverse analog networks worldwide. For its modular structure, it can be customized to fit into 2, 4, 6, 8, 12, 14, 16 ports from small to large offices or call center. To deliver unique flexibility and user-friendliness, Synway also offers USB recording box to customers.

 

USB/cPCI/PCI available, and cPCI/USB interface products support hot swap.

 

Up to 8 on-board modules (corresponding to 16 ports) can be configured freely for combined applications, such as trunking/recording, station/recording systemon a single board or box.

 

Adapt to environments where Tip and Ring are reversed.

 

With no conversation interruption, high impedance receivers record both sides of a call.

 

Data is stored in WINDOWS WAV format directly, and can be played out by the sound card with no format conversion.

 

A large selection of voice CODECS for developers, including G711 (A-law/ -law), Linear PCM, IMA-ADPCM, MP3, and VOX format supported.

 

Monitor all channels in real-time or playback audio files by on-board audio jack resources.

 

Voltage values and ring states are reported with standard SHCTI API events to simplify application development.

 

Easily control voltage detection event by configuring the analog board and USB box to the local analog environment.

 

Connected to phone line through RJ11 or USB connector without need for external wiring box, which facilitates connection and improve reliability.

 

Synway designs all kinds of analog boards (up to 120 ports) ideal for any analog environment, widely used small-scaled systems, call recording systems, call center monitoring, and microphone recording, etc.

 

A single protocol-independent API, which minimizes the processing overhead on the system CPU by executing protocols only on DSP and unifies application development across all Synway's product series, including USB series products.

 

With 2, 4, 6, 8, 10, 12, 14 or 16 port board/USB box, the ATP adapts to low to high density applications. The Synway's in-house unified API supports a total of 256 ports per system. In any analog environment, ATP can work well as tapping point between office and PBX, office and phones, PBX and phones and any other analog audio signals.

 

ATP supports passive call recording on groundstart and loopstart analog networks. Features such as programmable voltage thresholds, voltage detection, ring detection and polarity reversal are managed through Synway's in-house unified API, so the products can easily adapt or be quickly customized to variations in analog systems worldwide.

 

The built-in authorized code identification circuit is included to provide an exclusive authorization code for protecting users' software security.

 

PRODUCT MODELS SHT-8B/PCI Analog Passive Tap Board (PCI interface, 2 to 8 ports configurable) SHT-16B-CT/PCI Analog Passive Tap Board (PCI interface, 2-16 ports configurable, H.100) SHT-16B-CT/cPCI Analog Passive Tap Board (CompactPCI interface, 2 to 16 ports configurable, H.110) SHT-4B/USB Analog Tap Passive Board (USB interface,2 to 4 ports configurable) SHT-2B/USB Analog Tap Passive Board (USB interface,2 ports )   ENVIRONMENTAL CONDITIONS Operating temperature: 0℃ to +55℃ Storage temperature: -20℃ to +85℃ Humidity: 8% to 90% non-condensing Storage humidity: 8% to 90% non-condensing   TECHNICAL SPECIFICATIONS Max board per system: any combination up to 256 ports Max ports per system: up to 512 resource sharing BUS: H.100/H.110(for SHT-16B Board)   OPERATING SYSTEMS Windows 98/2000/2003/XP/ME/NT Linux   PHYSICAL CHARACTERISTICS Form Factor: Half/Full-size PCI card/ USB2.0/ 6U cPCI/ PCI-X   AUDIO SIGNAL Receive range: -68 dBm to + 3 dBm Input gain control: +20 to -20 dB Silence detection: programmable from API Automatic Gain Control (AGC): programmable from API Activity detection: programmable from API Frequency response: 300 - 3400 Hz (+/- 3dB) Signal/Noise ratio: >=42dB Idle channel noise: <=60dB Crosstalk coupling: <=-70 dB   ANALOG JACK Audio connector: φ3.5mm headphone jack Output impedance: 32 Ohms Play volume: programmable

TONE DETECTION DTMF digits: 0 - 9, *, #, A, B, C, D Dynamic range: -38 dBm to 0 dBm Minimum tone detection: 40 ms Fax tone detection: 1100/2200Hz Calling process tone detection: programmable*4   HARDWARE SYSTEM REQUIREMENTS Pentium 3 or equivalent 1 GHz or better PCI BUS, Rev. 2.2, 33Mhz, 32Bit/cPCI/USB 2.0   POWER REQUIREMENTS (4 port USB) +5 VDC: 300mA Watts (Max): 1.5W (8 port) +5 VDC: 600mA -12 VDC: 80mA +12 VDC: 300 mA Watts (Max): 7.6W (16 port) +5 VDC: 800mA -12 VDC: 120mA +12 VDC: 350 mA Watts (Max): 9.9W   AUDIO ENCODING 16Bit PCM 128Kbps 8Bit PCM 64Kbps A-Law: 64Kbps μ-Law: 64Kbps VOX: 32Kbps ADPCM: 32Kbps GSM: 13.6Kbps MP3: 8Kbps   TAP INTERFACE Insertion loss: <1dB Isolation: 500VDC AC impedance: 10k Ohms DC impedance: 2M Ohms Ring detection: 30Vrms (min), 16 to 68Hz Ringer equivalence number: < 0.2/programmable Voltage detection: -62V to +62V step=0.5V Caller ID: FSK/DTMF   SAFETY AND CERTIFICATIONS Lightning: Level 4 Certificates: FCC & CE & CISPR

 

Emission: FCC Part 15 Class A & Class B
Emission: EN55022
Emission: AS/NZS CISPR 22:2004 Class B
Immunity: EN55044
Immunity: AS/NZS CISPR 24:2002

Estimated MTBF (PCI bus interface): 96,000 hours per Bellcore Method I
Estimated MTBF (cPCI bus interface): 92,800 hours per Bellcore Method I

 

SHT-16B-CT/PCI---------------------up to 16 ports
SHT-16B-CT/cPCI--------------------up to 16 ports
SHT-8B/PCI---------------------------- up to 8 ports

SHT-4B/USB----------------------------up to 4 ports
SHT-2B/USB-----------------------------------2 ports

 

Synway offers two types of recording modules for ATP series board, including high-impedance record module (MR) and microphone record module (MR+). A single module interfaces to an on-board socket and corresponds to two channels. For instance, SHT-16B-CT/PCI is designed with 8 on-boards sockets(corresponding to 16 ports), so customers can freely configure 8 modules on the board from the following module types.

 

MR is used for recording inbound and outbound calling and can carry out a series of work such as DTMF detection, tone detection, recording voice and signaling data (caller-ID, called-ID), etc. With MR on the board, a perfect recording solution can beimplemented.

 

MR+ is the module that connects to a microphone for recording voices and signaling through the microphone. Synway's MR+ enhances and expands the diversity and flexibility in recording solutions.